Mazak Integrex 300S IV – Tour CNC Usagé 2007 – 32011119

Tour CNC

ANNÉE

2007

COURSE

AXIS TRAVELS:
B-Axis……………………………. 225 degrees
(0.0001 degree increments)
Y-Axis……………………………. +/- 4.53″
X-Axis……………………………. 24.8″
Z-Axis 60″ ……………………….. 62.41″
Second Headstock W-Axis 60″…………. 60.24″

AXIS RAPID RATES:
Y-Axis……………………………. 1024 IPM
X-Axis……………………………. 1496 IPM
Z-Axis……………………………. 1496 IPM
Second Headstock W-Axis…………….. 1181 IPM
C-Axis……………………………. 555 RPM

Maximum Swing……………………… 30″
NOTE: Tool eye body may limit max. swing.
Maximum Swing using Y-Axis………….. 26″-30″
Maximum Swing over Cross Slide………. 30″
Maximum Cutting Diameter: Chucking…… 30″
Maximum Cutting Length 60″………….. 60″
Maximum Distance Between Chuck Faces 60″ 60.2″

DIMENSIONS

BROCHE

TOURELLE

40 Outils

COMMENTAIRES

Maximum Swing……………………… 30″
NOTE: Tool eye body may limit max. swing.
Maximum Swing using Y-Axis………….. 26″-30″
Maximum Swing over Cross Slide………. 30″
Maximum Cutting Diameter: Chucking…… 30″
Maximum Cutting Length 60″………….. 60″
Maximum Distance Between Chuck Faces 60″ 60.2″

MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose………………………. A2-8
Spindle Bore………………………. 3.46″
Maximum Bar Work…. ………………. 3.0″ Dia.
Spindle Speed……………………… 4,000 RPM
Spindle Index (Programmable)………… 0.0001 Deg.
Spindle Horsepower (Cont./30 Mins.)…..30/40 HP (AC)
Spindle Torque…………………….. 534 ft-lbs.

SECOND SPINDLE SPECIFICATIONS (R)
Spindle Nose………………………. A2-8
Spindle Bore………………………. 3.46″
Spindle Speed……………………… 4,000 RPM
Spindle Index (Programmable) ……….. 0.0001 Deg. C-Axis
Spindle Horsepower (Cont./30 Min.)…… 26/34.6 HP (AC)
Spindle Torque…………………….. 368.8 ft-lbs

Magazine Capacity………………….. 40 Tools
Tool Selection Method………………. Random
Tool to Tool ATC Time………………. 1.3 Sec.
Max. Tool Dia. w/All Pockets Full……. 3.54″
Max. Tool Dia. w/Adjacent Pockets Empty. 4.92″
Max. Tool Length (From Gage-Line)……. 15.75″
Maximum Tool Weight………………… 22 lbs.
ATC Tool Shank…………………….. KM63
Rotary Tool Spindle Speed…………… 12,000 RPM
Rotary Tool Spindle Horsepower (20%ED).. 25 HP (AC)
Rotary Tool Torque (20%ED)………….. 88.2 ft-lbs.
Maximum Face Mill………………….. 3.937″
Maximum End Mill…………………… 1.25″
Maximum Drill……………………… 1.25″
Maximum Tap……………………….. 1-8 UNC

AXIS TRAVELS:
B-Axis……………………………. 225 degrees
(0.0001 degree increments)
Y-Axis……………………………. +/- 4.53″
X-Axis……………………………. 24.8″
Z-Axis 60″ ……………………….. 62.41″
Second Headstock W-Axis 60″…………. 60.24″

AXIS RAPID RATES:
Y-Axis……………………………. 1024 IPM
X-Axis……………………………. 1496 IPM
Z-Axis……………………………. 1496 IPM
Second Headstock W-Axis…………….. 1181 IPM
C-Axis……………………………. 555 RPM

GENERAL SPECIFICATIONS:
Floor Space (WxL) 60″ ……………… 201.2″ x 92.24″
Machine Height…………………….. 114.6″
Total Power Required (Machine Only)….. 83.5 KVA
NOTE: Actual Machine Main Transformer
KVA Rating Will be Greater.
Air Requirements…………………… 72.5 PSI/24.7 CFM
Machine Weight 60″…………………. 26840 lbs.